single-pole single-throw switches features ? multioctave bands 0.2 to 18 ghz ? current and ttl control ? low loss ? high isolation ? medium and high speed models ? drop-in models ? 2 ns models frequency insertion type dc power consumption range model loss isolation * vswr (reflective/ pos. supply neg. supply ordering additional (ghz) number (db, max.) (db, min.) (max.) absorptive) (ma, max.) (ma, min.) outline options features standard, multioctave band models s103a 1.5 50 1.6:1 ref 35 35 spst 1-5 C s103b 1.7 70 1.6:1 ref 35 35 spst 1-5 C 0.2C2 n103a 1.6 55 1.6:1 abs 35 35 spst 1-5 C n103b 1.8 75 1.6:1 abs 35 35 spst 1-5 C s113a 1.3 60 1.6:1 ref 35 35 spst 1-6 C 0.5C2 s113b 1.5 80 1.6:1 ref 35 35 spst 1-6 C n113a 1.5 55 1.6:1 abs 35 35 spst 1-5 C n113b 1.7 75 1.6:1 abs 35 35 spst 1-5 C s136a 1.8 60 1.7:1 ref 35 35 spst 1-6 C 2C8 s136b 2 80 1.7:1 ref 35 35 spst 1-6 C n136a 2 55 1.7:1 abs 35 35 spst 1-5 C n136b 2.2 70 1.7:1 abs 35 35 spst 1-5 C s147a 2 70 1.7:1 ref 35 35 spst 1-6 C 4C12 s147b 2.2 90 1.7:1 ref 35 35 spst 1-6 C n147a 2.3 50 1.7:1 abs 35 35 spst 1-5 C n147b 2.6 65 1.7:1 abs 35 35 spst 1-5 C s138a 2.6 60 2:1 ref 35 35 spst 1-6 C 2C18 s138b 3 80 2:1 ref 35 35 spst 1-6 C n138a 2.6 45 2:1 abs 35 35 spst 1-5 C n138b 3 60 2:1 abs 35 35 spst 1-5 C s128a 2.7 50 2:1 ref 35 35 spst 1-5 C 1C18 s128b 3 70 2:1 ref 35 35 spst 1-5 C n128a 2.8 45 2:1 abs 35 35 spst 1-5 C n128b 3.2 60 2:1 abs 35 35 spst 1-5 C electrical performance of multioctave models can be optimized over narrower bandwidths, or for a particular parameter. electric al options include: lower insertion loss, lower vswr, higher isolation, flat amplitude response, amplitude tracking. mechanical/control options include: custom packaging, single supply operation, fast switching time, single ttl control line. examples of custom models previously shipped are shown below. c onsult factory for options. optimized performance models 0.21C0.23 124794 1.8 80 1.6:1 abs 35 35 spst 5v,-12v. 0.5C2 126152 1.1 60 1.6:1 abs 70 70 contact factory 5v,-15v. 40ns switch speed 3C3.4 124516 1 60 1.5:1 abs C C spst 5v,-5v. 6ns rise/fall time 5C5.6 125473 1.3 60 1.5:1 abs C C spst 5v,-5v. 6ns rise/fall time 3C9 123296 1.7 60 1.7:1 ref C C spst 5v,-15v. 30ns switch speed 9.5C10.5 127922 2.5 70 1.7:1 abs 35 35 spst 5v,-15v. 5ns rise/fall time 2C18 124796 3.2 80 2:1 ref C C spst 5, -15v. 2ns rise/fall time 2C18 123297 2.8 70 1.8:1 ref 50 50 contact factory 15v. 4ns rise/fall time 2C18 122791 3 80 1.8:1 ref 50 50 contact factory 5v,-12v. 3ns rise/fall time 2C18 123797 2.8 70 1.8:1 ref 50 50 contact factory 5v,-15v. 4ns rise/fall time *for reflective models, vswr is not specified in the off state. for absorptive models, vswr in the off state is defined for port j2 only. 3
|